User’s Manual
Color LCD Monitor
English
TABLE OF CONTENTS
PRECAUTIONS ...................................................................................4
1. INTRODUCTION .....................................................................................9
1-1. Features....................................................................................................... 9
1-2. Package Contents ........................................................................................ 9
1-3. Controls & Connectors ............................................................................. 10
2. CABLE CONNECTION .........................................................................12
2-1. Before connecting ...................................................................................... 12
2-2. Connecting the signal cable ....................................................................... 13
2-3. Connecting two PCs to the monitor........................................................... 15
3. ScreenManager....................................................................................17
3-1. How to use the ScreenManager ................................................................. 17
3-2. ScreenManager Adjustments and Settings.................................................. 18
3-3. Fine Contrast............................................................................................. 19
3-4. Useful Functions........................................................................................ 20
4. ADJUSTMENT ......................................................................................22
4-1. Screen Adjustment..................................................................................... 22
4-2. Displaying a low resolutions...................................................................... 26
4-3. Color Adjustment...................................................................................... 28
4-4. Power-save Setup....................................................................................... 30
5. MAKING USE OF USB (Universal Serial Bus)...................................32
6. ATTACHING AN ARM STAND ..............................................................34
7.TROUBLESHOOTING...........................................................................36
8. CLEANING............................................................................................40
9. SPECIFICATIONS.................................................................................41
10. GLOSSARY.........................................................................................44
APPENDIX/ANHANG/ANNEXE ..................................................................i
TABLE OF CONTENTS
3
English
PRECAUTIONS
IMPORTANT!
• This product has been adjusted specifically for use in the region to which it was
originally shipped. If operated outside the region to which it was originally shipped,
the product may not perform as stated in the specifications.
• To ensure personal safety and proper maintenance, please read this section and the
caution statements on the unit (refer to the figure below).
[Location of the Caution Statements]
WARNING
If the unit begins to emit smoke, smells like something is burning, or
makes strange noises, disconnect all power connections immediately
and contact your dealer for advice.
Attempting to use a malfunctioning unit can be dangerous.
Do not dismantle the cabinet or modify the unit.
Dismantling the cabinet or modifying the unit may result in electric shock or
burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers
may expose you to dangerous voltage or other hazards.
4
PRECAUTIONS
English
WARNING
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet
or spillage into the cabinet may result in fire, electric shock, or equipment
damage.
If an object or liquid falls/spills into the cabinet, unplug the unit immediately.
Have the unit checked by a qualified service engineer before using it again.
Place the unit on a strong, stable surface.
A unit placed on an inadequate surface may fall, resulting in injury or
equipment damage.
When the unit is dropped, please ask your dealer for advice. Do not continue
using a damaged unit. Using a damaged unit may result in fire or electric
shock.
OK
Set the unit in an appropriate location.
Not doing so may cause damage and could result in fire or electric shock.
* Do not place in outdoors.
* Do not place in the transportation system (ship, aircraft, trains, automobiles,
etc.)
* Do not install in a dusty or humid environment.
* Do not place in a location where the steam comes directly on the screen.
* Do not place near heat generating devices or a humidifier.
To avoid danger of suffocation, keep the plastic packing bags away
from babies and children.
Use the enclosed power cord and connect to the standard power outlet
of your country. Be sure to remain within the rated voltage of the
power cord.
Not doing so may cause in fire or electric shock.
To disconnect the power cord, grasp the plug firmly and pull.
Never tug on the cord, doing so may cause damage and could result in fire or
electric shock.
OK
PRECAUTIONS
5
English
WARNING
The equipment must be connected to a grounded main outlet.
Not doing so may cause in fire or electric shock.
Use the correct voltage.
* Do not overload your power circuit, as this may result in fire or electric
shock.
* The unit is designed for use with a specific voltage only. Connection to
another voltage than specified in this User’s Manual may cause fire, electric
shock, or other damage.
* Do not overload your power circuit, as this may result in fire or electric
shock.
Handle the power cord with care.
* Do not place the cord underneath the unit or other heavy objects.
* Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord
may result in fire or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.
When attaching an arm stand, please refer to the user’s manual of the
arm stand and install the unit securely with the enclosed screws.
Not doing so may cause the unit to come unattached, which may result in
injury or equipment damage. When the unit is dropped, please ask your dealer
for advice. Do not continue using a damaged unit. Using a damaged unit may
result in fire or electric shock. When reattaching the tilt stand, please use the
same screws and tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal which leaks from the panel is poisonous if it enters the eyes
or mouth.
If any part of the skin or body comes in direct contact with the panel, please
wash thoroughly. If some physical symptoms result, please consult your
doctor.
Follow local regulation or laws for safe disposal.
The backlight of the LCD panel contains mercury.
6
PRECAUTIONS
English
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit
with the cord attached is dangerous. It may result in injury or equipment
damage.
When handling the unit, grip the bottom of the unit firmly with both
hands ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.
OK
Do not block the ventilation slots on the cabinet.
* Do not place books or any other papers on the ventilation slots.
* Do not install the unit in a closed space.
* Do not use the unit lying down or upside down.
Using the unit in these ways blocks the ventilation slots and prevents proper
airflow, leading to fire or other damage.
Do not touch the plug with wet hands.
Touching them may result in electric shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a
problem.
Periodically clean the area around the plug.
Buildup of dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric
shock.
If you plan to leave the unit unused for an extended period, disconnect
the power cord from the wall socket after turning off the power switch
for the safety and the power conservation.
PRECAUTIONS
7
English
LCD Panel
The screen may have defective pixels. These pixels may appear as slightly light
or dark area on the screen. This is due to the characteristics of the panel itself,
and not the product.
The backlight of the LCD panel has a fixed life span. When the screen becomes
dark or begins to flicker, please contact your dealer.
Do not press on the panel or edge of the frame strongly, as this will result in
damage to the screen. There will be prints left on the screen if the pressed
image is dark or black. If pressure is repeatedly applied to the screen, it may
deteriorate or damage your LCD panel. Leave the screen white to decrease the
prints.
Do not scratch or press on the panel with any sharp objects, such as a pencil or
pen as this may result in damage to the panel. Do not attempt to brush with
tissues as this may scratch the LCD panel.
8
PRECAUTIONS
English
1. INTRODUCTION
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
• Dual inputs compliant
• DVI (p. 44) Digital input (TMDS (p. 45)) compliant
• Horizontal scanning frequency: 27 - 82 kHz (Digital input: 27 - 64 kHz)
Vertical scanning frequency: 50 - 85 Hz Vertical (1280 x 1024 ~ 75 Hz)
Vertical (Digital) of 60 Hz (VGA text: 70 Hz)
Resolution: 1280 x 1024
• Smoothing function incorporated for the adjustment of an enlarged image. (p.26)
• Fine contrast modes, to select the most suitable mode for screen display (p.19)
• The utility software “ScreenManager Pro for LCD” (for Windows) which can control
the monitor from a PC with a mouse or keyboard, is included (refer to the EIZO
LCD Utility Disk).
• Supports to sRGB (p.45) standard
• USB (Universal Serial Bus) hub supported. (p.32)
• The height adjustable stand incorporated
• Ultra slim bezel incorporated
• The Portrait/Landscape display capability
1-2. Package Contents
Please contact your local dealer for assistance if any of the listed items are missing or
damaged.
• LCD Monitor
• EIZO LCD Utility Disk
• User’s Manual
• Power Cord
• Signal Cable (FD-C16)
• Signal Cable (FD-C04)
• EIZO USB Cable (MD-C93)
• ScreenManager Quick Reference
• LIMITED WARRANTY
NOTE
• Please retain the packing materials for future transference.
1. INTRODUCTION
9
English
1-3. Controls & Connectors
Front
(2)
(1)
Fine Contrast Menu
Control Panel
SIGNAL
1 - 2
AUTO
ENTER
(3)
(5)
(7)
(8)
(4)
(6)
(1) ScreenManager Main Menu
(2) Main Power Switch
(3) Input signal selection button
(4) Auto Adjustment Button
(5) Enter Button
(6) Control Buttons*1
(7) Power Button
(8) Power Indicator*2
Green
Yellow
Operation
Power saving
Flashing yellow
(2 times for
each)
Power save mode Digital only
Flashing yellow
slowly
Power is off (Main power is on)
Power off
Off
*1 Directly pushing the left or right button allows you to select a fine contrast mode, see
page 19. The ScreenManager Main Menu and the Fine Contrast Menu cannot be
displayed at the same time.
*2 Regarding the power indicator for the “Off Timer”, see page 20.
10 1. INTRODUCTION
English
Rear
(9)
(11)
(10)
Bottom
(12) (13)(14) (15)
(9) Height Adjustable Stand (Detachable)* 3
(10) Power Terminal Covers for the Optional peripheral
(11) Security Lock Slot*4
(12) DVI-I Input Connector x 2 (SIGNAL 1, SIGNAL 2)
(13) USB Port (4 Downstream)
(14) USB Port (1 Upstream)
(15) Power Connector
*3
The LCD monitor has the capability of the Portrait/Landscape display. (The panel
pivots in the clockwise direction 90°.) For the Portrait display, use the software for
the portrait.
The LCD monitor can be used with an optional arm stand by removing the stand.
(see page 34)
*4
Allows for connection of a security cable. This lock supports Kensington’s
MicroSaver security system. For further information, please consult’
Kensington Technology Group
2855 Campus Drive, San Mateo, CA 94403 USA
Tel.: 800-650-4242, x3348, Intl: 650-572-2700, x3348
Fax: 650-572-9675
1. INTRODUCTION 11
English
2. CABLE CONNECTION
2-1. Before connecting
Before connecting your monitor to the PC, change the display screen settings (resolution
p. 45) and frequency) in accordance with the charts below.
NOTE
• When your computer and display support VESA DDC, the suitable resolution and
the refresh rate are set by just plugging your display into the computer without any
manual settings.
Analog Input
Resolution
Frequency
~ 85 Hz
70 Hz
Remarks
VGA, VESA
VGA TEXT
VESA
640 × 480
720 × 400
800 × 600
~ 85 Hz
75 Hz
832 × 624
Apple Macintosh
VESA
1024 × 768
1152 × 864
1152 × 870
1152 × 900
1280 × 960
1280 × 960
1280 × 1024
1280 × 1024
~ 85 Hz
75 Hz
VESA
75 Hz
Apple Macintosh
SUN WS
~ 76 Hz
60 Hz
VESA
75 Hz
Apple Macintosh
SUN WS
67 Hz
~ 75 Hz
VESA
Digital Input
Only the following resolutions with frequency can be displayed on this model.
Resolution
640 × 480
Frequency
60 Hz
Remarks
VGA
720 × 400
70 Hz
VGA TEXT
VESA
800 × 600
60 Hz
1024 × 768
1280 × 1024
60 Hz
VESA
60 Hz
VESA
12 2. CABLE CONNECTION
English
2-2. Connecting the signal cable
NOTE
• Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Power Cord
Analog Input
Signal Cable
Connector
Video Output
Connector D-Sub mini
15 pin
PC
Signal Cable (FD-C16
enclosed)
Standard graphics card
Macintosh G3 (Blue & White)
/ G4
Signal Cable (FD-C16
enclosed) + Macintosh
Adapter (Optional)
Video Output
Connector D-Sub 15
pin
Macintosh
Macintosh Adapter (Optional)
Digital Input
Signal Cable
Connector
PC
Signal Cable (FD-C04
enclosed)
Video Output
Connector DVI
Digital graphics board
NOTE
• The monitor is not compatible with a Power Macintosh G4/G4 Cube ADC
(Apple Display Connector)
2. Plug the power cord into the power connector on the rear of the
monitor.
2. CABLE CONNECTION 13
English
3. Lead the power cord and signal cable into the cable holder at rear of
the monitor.
NOTE
• The cables are recommended to lead with slight sag for the smooth motion of
the stand and the Portrait/Landscape display.
Cable Holder
4. Plug the other end of the power cord into a power outlet.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may cause in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may cause in fire or electric shock. Not doing so
may cause in fire or electric shock.
5. Turn on the monitor's power button and then switch on the PC's
power.
The monitor’s power indicator will light up (green).
If an image does not appear, refer to the “TROUBLE SHOOTING” (p.36) for
advice.
Whenever finished, turn off the PC and the monitor.
NOTE
• When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or
Digital) is displayed for a few seconds on the right top corner of the screen.
• Adjust brightness of the screen depending on the brightness of your environment.
• Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
14 2. CABLE CONNECTION
English
2-3. Connecting two PCs to the monitor
Two PCs can be connected to the monitor through the Signal 1 and the Signal 2 on the
back of the monitor.
Connecting Examples
Signal 1
Signal 2
PC 1
PC 2
(Ex.1) Analog D-Sub
Signal Cable
Signal Cable
DVI
Digital
mini 15
pin
(FD-C16 enclosed)
(FD-C04 enclosed)
(Ex.2) Analog D-Sub
Signal Cable
Signal Cable
D-Sub Analog
mini
15 pin
mini 15
pin
(FD-C16 enclosed)
(FD-C16 optional)
(Ex.3) Digital DVI
Signal Cable
Signal Cable
DVI
Digital
(FD-C04 enclosed)
(FD-C04 optional)
2. CABLE CONNECTION 15
English
Selecting the active input
The Input signal selection button on the front panel can be used to select either Signal 1
or Signal 2 as the active input at any time. Every time the button is pressed, the input
changes. When switching the signal, the kind of the input signal (Signal1 or 2/Analog or
Digital) is displayed for a few seconds on the right top corner of the screen.
Input signal selection button
SIGNAL
1 - 2
AUTO
ENTER
The priority input signal
This function is used to select which PC will have priority to control the monitor when
utilizing two PCs. The monitor constantly checks the input signals and switches
automatically in accordance with the “Input Priority” setting (see table below). Once a
priority is set, whenever a change of signal is detected at the selected input, the monitor
will switch the input to that signal.
In the case of only one signal being present at either input, the monitor automatically
detects and displays that signal.
Priority
setting
Performance
If signals from both inputs are present, the monitor gives preference to
Signal 1 in the following cases.
Signal 1
• When the power of the monitor is turned ON
• When the signal input to Signal 1 is changed even if active input was Signal
2.
If signals from both inputs are present, the monitor gives preference to
Signal 2 in the following cases.
Signal 2
Manual
• When the power of the monitor is turned ON
• When the signal input to Signal 2 is changed even if active input was Signal
1.
The monitor will not detect signals automatically in this mode. Select the
active input by pressing the input signal selection button on the monitor’s
front panel.
NOTE
• When the Signal 1 or Signal 2 is selected, the power saving mode of the monitor
activates only if both PCs are in power saving mode.
16 2. CABLE CONNECTION
English
3. ScreenManager
3-1. How to use the ScreenManager
ScreenManager allows you to adjust screen performance though the main menu and
select a fine contrast mode easily.
[Ex.] Custom
Main Menu
Control Buttons
Left, Down, Up, Right
SIGNAL
1 - 2
AUTO
ENTER
Auto Adjustment
button
Fine Contrast Menu
Enter button
NOTE
• Main Menu and Fine Contrast Menu cannot be activated at the same time.
1. Entering the ScreenManager
Push the Enter button once to display the main menu of the ScreenManager.
2. Making Adjustments and Settings
(1) Select the desired sub menu icon using the Control buttons and push the Enter
button. The sub menu appears.
(2) Use the Control buttons to select the desired setting icon and push the Enter
button. The setting menu appears.
(3) Use the Control buttons to make all required adjustments and push the Enter
button to save the settings.
3. Exiting the ScreenManager
(1) To return to the main menu, select the <Return> icon or push the down button
twice, followed by the Enter button.
(2) To exit the ScreenManageru, select the <Exit> icon or push the down button
twice, followed by the Enter button.
NOTE
• Double clicking the Enter button at any time also exits the ScreenManager menu.
Fine Contrast Menu
Directly pressing the left or right button allows you to select the best suited
mode for screen display from 6 fine contrast modes;Text, Picture, Movie, sRGB,
Custom and External. To exit the menu, push the Enter button. (p. 19)
3. ScreenManager 17
English
3-2. ScreenManager Adjustments and Settings.
The following table shows all the ScreenManager’s adjustment and setting menus.
“*” indicates adjustments of analog input only and “**” indicates digital input only.
Main menu
Sub menu
Reference
*
*
Screen
Clock
4-1. Screen Adjustment (p.22)
Phase
Position
Resolution
*
*
Range Adjustment
Smoothing
Signal Filter
Color(Custom)*1 Brightness
4-3. Color Adjustment (p.28)
Temperature
Gamma
Saturation
Hue
Gain
6 Colors
Reset
**
*
PowerManager
Others
DVI DMPM
4-4. Power-save Setup (p.30)
VESA DPMS
EIZO MPMS
Screen Size
Border Intensity
Input Priority
Off Timer
*
4-2. Displaying a low resolutions (p.26)
Select the priority input signal. (p.16)
Set the monitor’s off timer to on or off.
(p.20)
Beep
Set the monitor’s beeper to on or off. (p.42)
Change the size of the menu.
Menu
Menu Size
Settings
Menu Position
Menu Off Timer
Translucent
Rotate
Adjust the menu position
Set the menu displaying time.*2
Set the transparency of the background.
Change the orientation of the
ScreenManager.
Reset
Return to the factory default settings. (p.42)
Information
Language
Information
Review the ScreenManager’s settings,
model name, serial number and usage
time*3.
English, German, French,
Spanish, Italian, Swedish and
Japanese
Select the ScreenManager’s language.
*1The adjustable functions depend on the selected fine contrast mode. The above table
shows the sub menus when the ‘custom’ mode is selected (see page 28).
*2The displaying time of the Fine Contrast Menu cannot be changed.
*3Due to the inspection on the factory, the usage time may not be “0 hour” at shipping.
18 3. ScreenManager
English
3-3. Fine Contrast
This function allows you to select the best suited mode for screen display.
To select the Mode
Directly pressing the left or right button allows you to select the best suited mode for
screen display from 6 fine contrast modes; Text, Picture, Movie, sRGB, Custom and
External. Color settings each mode can be adjusted by using the <Color> menu of the
ScreenManager.
NOTE
• When the main menu of ScreenManager is displayed on the screen, the Fine
Contrast Menu cannot be activated.
Exit
Push the enter button to exit the menu.
Fine Contrast Menu
[Ex.] Custom
Enter Button
Current Mode
Control Buttons
Left, Right
Setting status of
Brightness, Temperature
and Gamma
SIGNAL
1 - 2
AUTO
ENTER
Fine Contrast Mode
Selectable fine contrast modes are as follows.
Text
Text on word processor or spreadsheet software
Picture
Movie
sRGB
Photo or picture image
Animated images
To display the screen images based on those original colors (ex. over
the Internet)
Custom
External
To adjust the color settings according to your preference
Color reproduction by setting the values of color coordinate and
gamma with using the “ScreenManager Pro for LCD (for
Windows)” (Refer to the EIZO LCD Utility Disk.)
Color adjustment of the mode settings
<Brightness>, <Temperature> and <Gamma> settings can be adjusted on the Fine
Contrast Menu. Select the desired function icon with the Up/Down control buttons and
adjust with the Left/Right buttons. (Setting(s) of <Temperature> and/or <Gamma> is
defined as standard default in some modes. (p. 28))
Detailed Adjustments
The detailed color settings of each mode can be adjusted by using the <Color> menu of
the ScreenManager. (See page 28)
3. ScreenManager 19
English
3-4. Useful Functions
Adjustment Lock
Use the “Adjustment Lock” function to prevent any accidental changes.
Locked function
• Auto adjustment button adjustments and settings in the
ScreenManager.
• Auto Adjustment Button
Unlocked function
• Selecting of the Fine Contrast mode by the control buttons.
• Input signal selection button
• To lock
Switch off the monitor’s power by the power button on the front panel. Press on the
Auto adjustment button while switching on the monitor’s power.
• To unlock
Switch off the monitor’s power by the power button on the front panel, then hold
down the Auto adjustment button once again and turn the power back on.
Off Timer
The off timer function causes the monitor to automatically enter a power off state after
a predetermined amount of time has lapsed. This function was created to reduce
afterimage (p.44) characteristics that are particular to LCD monitors when the monitor
screen is left on for a long period without use.
[Procedure]
(1) Select <Off Timer> in the ScreenManager <Others> menu.
(2) Select “Enable” and press the right and left buttons to adjust the “On Period” (1 to
23 hours).
[Off timer system]
PC
Monitor
LED
On Period (1H - 23H)
Last 15 min. in "On period"
"On period" expired
Operation
Green
Advance Notice *1
Green Flashing
Power off
Flashing yellow slowly
*1Advance notice (LED flashing green) will be given 15 minutes before the monitor automatically
enters the “Power Off” mode. To delay entering the “Power Off” mode, press the power button
during the advance notice period. The monitor will continue to operate for an additional 90
minutes.
[Procedure]
Press the power button to return to a normal screen.
NOTE
• The off timer function works while the PowerManager is active, but there is no
advance notice before the monitor’s power is switched off.
20 3. ScreenManager
English
EIZO Logo appearing function
When switching on the power button on the front panel, the EIZO logo is displyed for a
while. If you desire to display or undisplay this logo, use this function. (Default is logo
appearing.)
• To undisplay
Switch off the monitor’s power by the power switch on the front panel, then hold
down the Enter button once again and turn the power back on.
• To display again
Switch off the monitor’s power by the power switch, then hold down the Enter
button once again and turn the power back on.
3. ScreenManager 21
English
4. ADJUSTMENT
4-1. Screen Adjustment
NOTE
• Allow the LCD monitor to stabilize for at least 20 minutes before making image
adjustments.
When connecting the DVI cable for digital input, see page 25.
Analog Input
Screen adjustments for the LCD monitor should be used in suppressing screen flickering
and also for adjusting the screen to its proper position. There is only one correct
position for each display mode. It is also recommended to use the ScreenManager
function when first installing the display or whenever changing the system. For
convenience, an easy set-up Program installed on the utility disk to assist in the set-up
procedure is provided.
Adjustment Procedure
1. Push the Auto adjustment button on the front panel.
The message “Your setting will be lost, if you press again now.” appears and
remains on the screen for 5 seconds. While the message is on the screen, push the
Auto adjustment button again to automatically adjust the clock, phase, screen
position and resolution. If you do not wish to do adjust the screen, do not push
the Auto adjustment button again.
NOTE
• The Auto sizing function is intended for use on the Macintosh and on AT-
compatible PC running Windows. It may not work properly in either of the
following cases.
When running an AT-compatible PC on MS-DOS (Not windows). The
background color for the “wall paper” or “desktop” pattern is set to black.
If the appropriate screen cannot be made by using the Auto adjustment
button, adjust the screen through the following procedures. If the
appropriate screen can be made, proceed to step 4.
2. Run the “Screen adjustment program”.
Having read the “Readme.txt” file, run the “Screen adjustment program” in the
enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by the
wizard guide. (If using the Windows, the program can be directly run from the
menu screen of the CD-ROM.)
22 4. ADJUSTMENT
English
NOTE
• If the user’s operating system has no utility disk (e.g. OS/2), we recommend
setting the desktop pattern to that as shown in the diagram on the following.
3. Adjust by using <Screen> menu in the ScreenManager.
(1) Vertical bars appear on the screen
→
Use the <Clock> (p.44) adjustment.
Select the “Clock” and eliminate the vertical bars by using the right and left of
the control buttons. Do not continuously press the control buttons, as the
adjustment value will change quickly and make it difficult to locate the most
suitable adjustment point.
If the horizontal flickering, blur or bars appear, proceed to “Phase” adjustment
as follows.
NOTE
• When adjusting the <Clock>, the horizontal screen size will also change.
(2) Horizontal flickering, blurring or bars appear on the screen.
→
Use the <Phase> (p.45) adjustment.
Select the <Phase> and eliminate the horizontal flickering, blurring or bars by
using the right and left buttons.
NOTE
• Horizontal bars may not completely disappear from the screen depending on
the PC.
4. ADJUSTMENT 23
English
(3) The screen position is not incorrect.
Use the <Position> adjustment.
→
The correct displayed position of the monitor is decided because the number
and the position of the pixels are fixed. The <Position> adjustment moves the
image to the correct position.
Select <Position> and adjust the position of the upper left corner of the image
by using the up, down, right and left buttons in order to align the screen.
If vertical bars of distortion appear after finishing the <Position> adjustment,
return to <Clock> adjustment and repeat the previously explained adjustment
procedure (“Clock” → “Phase” → “Position”)
(4) Screen image is smaller or larger than the actual screen images.
→
Use the <Resolution> adjustment.
Adjustment is needed when the input signal resolution and the resolution now
being displayed are different.
Select <Resolution> and confirm if the resolution now being displayed is the
same as the input resolution. If it is not, adjust the vertical resolution using the
up and down button and adjust the horizontal resolution using the right and
left buttons.
Smaller than the actual screen images.
Adjusted to actual screen
Larger than the actual screen images.
24 4. ADJUSTMENT
English
4. Adjust the output signal range (Dynamic Range) of the signal.
Use the <Range Adjustment> (p.45) of <Screen> menu.
→
This controls the level of output signal range to display the whole color gradation
(256 colors).
[Procedure]
Push the Auto adjustment button on the front panel while displaying the <Range
Adjustment> menu to automatically adjust the range. The screen blanks for a
moment and adjusts the color range to display the whole color gradation of the
current output signal.
Digital input
The monitor displays the digital input image correctly based on its pre-setting data.
However, if the image position is not correct or larger than the actual image screen,
please adjust the following adjustment items using the “Screen” menu of the
ScreenManager.
1. The screen position is incorrect.
→
Use the <Position> adjustment.
See page 24.
2. Screen image is smaller or larger than the actual screen images.
→
Use the <Resolution> adjustment.
See page 24.
4. ADJUSTMENT 25
English
4-2. Displaying a low resolutions
The lower resolutions are enlarged to full screen automatically. Using the <Screen Size>
function in the <Others> menu enables to change the screen size.
1. Enlarge the screen size when displaying a low resolution.
→
Select the <Screen Size>.
Select the <Screen Size> in the others menu and select the screen size by using the
up and down buttons.
Menu
Function
Displays the picture on the screen in full, irrespective of the picture’s
resolution. Since the vertical resolution and the horizontal resolution
are enlarged at different rates, some images may appear distorted.
Full
Displays the picture on the screen in full, irrespective of the picture’s
resolution. Since the vertical resolution and horizontal resolution are
enlarged at same rates, some horizontal or vertical image may
disappear.
Enlarged
Normal
Displays the picture at the actual Screen resolution.
Example: Displaying1024 x 768
Normal
Enlarged
Full (Default Setting)
(1024×768)
(1280×1024)
(1280×960)
2. Smooth the blurred texts of the enlarged screen.
Switch the <Smoothing> setting.
→
Select the suitable level from 1 – 5 (Soft – Sharp).
Select <Smoothing> in the <Screen> menu and adjust by using the right and left
buttons.
NOTE
• <Smoothing> is disabled when the screen is displayed in the following
resolutions.
*1280 x 1024
*The image size is doubled both in horizontally and vertically to (i.e. 1280 x
960 enlarged from 640 x 480) provide clear focus which does not require this
function.
26 4. ADJUSTMENT
English
3. Set the brightness of the black area surrounding the displayed image.
→
Set the <Border Intensity>.
In the <Enlarge> mode or <Full Screen> mode, the outer area (border) is usually
black.
Select <Border Intensity> in the <Others> menu and adjust by using the right and
left buttons.
Border
4. ADJUSTMENT 27
English
4-3. Color Adjustment
Color settings of each Fine Contrast mode can be adjusted and saved by using the
<Color> menu of the ScreenManager.
In the analog input, perform the “Range Adjustment” (p.25) before making the
color adjustments.
During color adjustments, the Fine Contrast mode cannot be changed. Select
the mode in advance by using the Fine Contrast Mode.
Adjustment items
The adjustable items and displayed icons on the ScreenManager depend on the selected
Fine Contrast mode
“√”: Settable/Adjustable “−”: Fixed at the factory
Icons
Functions
Fine Contrast Modes
Text
Picture
Movie
sRGB
Custom
External
Brightness
*
*
√
√
√
√
√
√
Temperature
√
√
√
√
−
√
√
−
√
−
−
−
√
√
√
−
−
−
Gamma
*
Saturation
Hue
√
−
√
−
√
−
−
−
√
√
−
−
Gain
6 colors
Reset
−
√
−
√
−
√
−
−
√
√
−
−
*These settings can be also adjusted on the Fine Contrast menu. (p.19)
NOTE
• Allow the LCD monitor to stabilize for at least 20 minutes before making image
adjustments. (Allow the monitor to warm up for at least 20 minutes before making
adjustments.)
• Performing the <Reset> of the <Color> menu returns the color settings of the
selected mode to the default settings.
• The values shown in percentages represent the current level within the specific
adjustment. They are available only as a reference tool. (To create a uniform white
or black screen, the percentages for each will probably not be the same.)
28 4. ADJUSTMENT
English
Adjustment Contents
Menu
Function Descriptions
Adjustable range
0 ∼ 100%
Brightness
To set the brightness of the
screen
Temperature
(p.45)
To set the color temperature
4,000 ∼ 10,000 K
in 500 K increments (including
9,300 K). Default setting is off
(normal white)
NOTE
• The values shown in the Kelvin are available only as a reference tool.
• Setting the temperature under 4,000 K or over 10,000 K invalidates the
color temperature setting. (The color temperature’s setting turns “OFF”.)
Gamma (p.44)
Saturation
To set the gamma value
1.4 ∼ 3.0
NOTE
• If setting the gamma value, the using the monitor in the digital signal
input is recommended.
If using the monitor in the analog input signal, set the gamma value from
1.8 to 2.2.
To change the saturation
-16 ∼ 16
Setting the minimum level (-16)
turns the image to the
monochrome.
NOTE
• The <Saturation> adjustment may cause undisplayable color tone.
Hue
To change the flesh color, etc.
-20 ∼ 20
NOTE
• The <Hue> adjustment may cause undisplayable color tone.
Gain
To change each color (red, green
and blue)
0 ∼ 100%
By adjusting the red, green and
blue color tones for each mode,
custom colors can be defined. The
100 % indicates unadjusted
condition. Display a white or gray
background image and adjust the
<Gain>.
NOTE
• The values shown in the percentage are available only as a reference
tool.
• Setting the <Temperature> (p45) invalidates the <Gain> adjustment.
<Gain> setting returns to the default: All the color indicates 100 %.
6 colors
Reset
To adjust <Saturation> and
<Hue> in each color (Red, Yellow,
Green, Cyan, Blue and Magenta)
Hue: -20 ∼ 20
Saturation: -16 ∼ 16
To return the color settings of the
selected mode to the default
settings
Select the “Reset”.
4. ADJUSTMENT 29
English
4-4. Power-save Setup
The <PowerManager> menu in the ScreenManager enables to set the power-save setup.
NOTE
• Do your part to conserve energy, turn off the monitor when you are finished using it.
Disconnecting the monitor from the power supply is recommended to save energy
completely.
• Even if the monitor is in a power saving mode, USB compliant devices function
when they are connected to the monitor’s USB (both the upstream and the
downstream ports). Therefore, power consumption of the monitor will change
according to the connected devices even if the monitor is in a power saving mode.
Analog input
This monitor complies with the <VESA DPMS> (p.45) standard and adopts a power
saving method, <EIZO MPMS> (p.44), which works with a blank screen (totally black
screen) like “Blank Screen” ScreenSaver software.
To use the PC’s power saving system (VESA DPMS ).
[Procedure]
(1) Set the PC’s power saving settings.
(2) Select “VESA DPMS” in the <PowerManager> menu.
[Power saving system]
PC
Monitor
LED
Operation
Operation
Green
STAND-BY
SUSPEND
Power saving
Power saving
Yellow
OFF
Operate the mouse or keyboard to return to a normal screen.
30 4. ADJUSTMENT
English
To set the power save with ScreenSaver (EIZO MPMS) software.
[Procedure]
(1) Set the PC’s appropriate ScreenSaver settings or blank the screen (totally black
screen).
(2) Select <EIZO DPMS> in the <PowerManager> menu.
[Power saving system]
PC
Monitor
LED
Operation
Operation
Green
Blank the screen
Power saving
Yellow
(ScreenSaver or Macintosh Energy
Saver)
Operate the mouse or keyboard to return to a normal screen.
NOTE
• EIZO MPMS should be used with Macintosh “EnergySaver”.
Digital input
This monitor complies with the DVI DMPM (p.44).
[Procedure]
(1) Set the PC’s power saving settings.
(2) Select “VESA DPMS” in the <PowerManager> menu.
[Power saving system]
PC
On
Monitor
Operation
LED
Green
Yellow
Power saving
Power saving
Flashing yellow (2 times
for each)
Off mode
Power saving*1
*1Power saving through the PC’s off mode is only supported when “Manual”
is selected on the ScreenManager’s <Input Priority>.
[Procedure]
Operate the mouse or keyboard to return to a normal screen.
Power on the PC to return a normal screen from the Off mode of the PC.
4. ADJUSTMENT 31
English
5. MAKING USE OF USB
(Universal Serial Bus)
This monitor provides a hub which supports the USB standard. When connecting to a
USB compliant PC or another hub, the monitor functions as a hub to which the USB
compliant peripherals can be easily connected.
Required system environment
• PC equipped with USB ports or another USB hub connected to the USB compliant PC
• Windows 98/2000/XP // Mac OS 8.5.1 or later
• EIZO USB Cable (Optional)
NOTE
• The USB hub function may not work properly depending on the PC, OS or
peripherals. Please consult the manufacturer of each device about the USB
support.
• When the monitor is not on, the peripherals connected to the downstream ports will
not operate.
• Even if the monitor is in a power saving mode, the devices connected to the
monitor’s USB ports (both the upstream and the downstream) will function.
• The followings are procedures for the Windows 98/Me/2000/XP and Mac OS.
Connecting to the USB HUB
1. Connect the monitor to the PC with the signal cable (See page 13)
first, then turn on the PC.
2. Connect the upstream port of the monitor to the downstream port of
the USB compliant PC or another hub by using the USB cable.
Upstream Ports
Upstream port:
Connect the USB compliant PC or
another hub using the USB cable.
To Downstream Ports of
the PC or Another Hub
After connecting the USB cable, the USB function can be set up automatically.
32 5. MAKING USE OF USB (Universal Serial Bus)
English
3. After setting up, the monitor’s USB hub is available for connecting
USB compliant peripherals to the downstream ports of the monitor.
Connecting Examples
Scanner
Digital
Camera
Monitor
PC
Mouse
Keyboard
Printer
Downstream
Downstream ports:
Connect the cables from USB
compliant peripherals such as a
mouse, keyboard, etc.
Printer
Digital Camera
Scanner
Keyboard
ScreenManager Pro for LCD (for Windows)
For further details about the “ScreenManager Pro for LCD (for Windows)”, refer to the
EIZO LCD Utility Disk.
5. MAKING USE OF USB (Universal Serial Bus) 33
English
6. ATTACHING AN ARM STAND
The LCD monitor can be used with an arm stand by removing the tilt stand and
attaching the arm stand to the LCD monitor.
NOTE
• Use an arm stand that satisfies the followings.
- When using the LCD monitor with an arm stand, the arm stand must be VESA
approved:
Use an arm stand with a 100 mm x 100 mm hole spacing on the arm mounting
pad.
Weight: Use an arm stand that is able to support an object weighting 13.5 kg
(29.8 lbs.).
- TÜV/GS approved arm stand
- Use an arm stand with sufficient stability (mechanical firmness) to support the
weight of the monitor.
- Use an arm stand remaining that position where it is manually moved.
- Use an arm stand with the ability to tilt the monitor forward and backward.
• Please connect cables after attaching an arm stand.
Setup Procedure
1. Hold the center of the stand mounting cover and slide them
rightward or leftward to remove the mounting cover.
Stand mounting cover
2. Lay the LCD monitor down. Do not scratch the panel.
3. Remove the tilt stand by loosening the screws.
(4 pcs of M4 x 15 BZn/Fe)
34 6. ATTACHING AN ARM STAND
English
4. Attach an arm stand to the LCD monitor securely.
Arm-stand
M4 Mounting Screws: M4 x 15 (mm) BZn/Fe
6. ATTACHING AN ARM STAND 35
English
7.TROUBLESHOOTING
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.
• No picture problems → See No.1 ~ No.2
• Imaging problems → See No.3 ~ No.14
• Other problems → See No.15 ~ No.19
• USB problems → See No.20 ~ No.21
Problems
Points to check with possible solutions
ꢀCheck that the power cord is correctly connected.
If the problem persists, turn off the monitor power
for a few minutes, then turn it back on and try
again.
1. No picture
• Indicator status: Off
ꢀCheck the “Brightness” setting.
• Indicator status: Green
• Indicator status: Yellow
ꢀSwitch the signal input by pressing the input signal
selection button on the front control panel.
ꢀTry pressing a key on the keyboard, or clicking the
mouse.
(p.30)
• Indicator status: Slowly flashing
Yellow
ꢀTry pressing the power button.
ꢀTry turning the PC on.
• Indicator status: Flashing Yellow
(twice for each)
These message appear when the signal is not inputted
correctly, even if the monitor functions properly.
2. Error messages shown below will
remain on the screen for 40
seconds.
ꢀWhen the image is displayed correctly after a short
time, there is no problem with the monitor. (Some
PCs do not output the signal soon after powering
on.)
ꢀCheck that the PC is turned ON.
ꢀCheck that the signal cable is properly connected to
the PC or graphics board.
ꢀSwitch the signal input by pressing the input signal
selection button on the front control panel.
ꢀUse the graphics board’s utility software to change
the frequency setting. (Refer to the manual of the
graphics board.)
• Whenever an error signal message
appears, the signal frequency will be
displayed in red.
(Example)
36 7. TROUBLESHOOTING
English
Problems
Points to check with possible solutions
ꢀAdjust the image position using the <Position>
(p.24) If the problem persists, use the graphics
board’s utility software to change the display
position if available.
3. Display position is incorrect.
ꢀAdjust the resolution using the <Resolution>.
4. Screen image is smaller or larger
than the actual screen images.
(p.24)
ꢀDecrease the vertical bars using the <Clock>. (p.23)
5. Vertical bars of distortion appear.
ꢀIf using the monitor in the analog input signal, try
6. The characters and images have
several vertical bars on their right
side.
setting the gamma value from 1.8 to 2.2. (p.29)
ꢀDecrease the horizontal bars using the <Phase>.
7. Horizontal bars of distortion appear.
(p.23)
ꢀAdjust the blurred lines using <Smoothing> (p.26)
8. Letters and lines appear blurred.
ꢀThis happens when both composite (X-OR) input
signal and separate vertical synchronizing signal
are input. Please select one of the two.
9. Distortion appears like the figure
below.
ꢀAdjust the <Brightness> (The backlight of the LCD
monitor has a fixed life span. When the screen
becomes dark or begins to flicker, please contact
your dealer.)
10. The screen is too bright or too dark.
7. TROUBLESHOOTING 37
English
Problems
Points to check with possible solutions
ꢀWhen the screen image is changed after displaying
the same image for a long period, an afterimage
may appear. The “Afterimage” can be removed
gradually by changing the displayed image. Use
the “Off Timer” function and avoid keeping the
screen on all the time. (p.20)
11. Afterimages appear.
ꢀThis is due to the characteristics of the panel itself
12. The screen has defective pixels (e.g.
slightly light or dark).
and not the LCD product.
ꢀLeaving the screen white may solve the problem.
13. Fingerprints remain on the screen.
14. The noise appears on the screen.
ꢀChange the mode in <Signal Filter> in the <Screen>
menu.
ꢀ<Smoothing> is disabled when the screen is
15. The <Smoothing> cannot be
selected.
displayed in the 1280 x1024.
ꢀThe image size is doubled both in horizontally and
vertically to (i.e. 1280 x 960 enlarged from 640 x
480) provide clear focus which does not require
this function.
ꢀThe adjustment lock is probably on. To unlock:
switch the LCD monitor off. Then, while pressing
the Auto adjustment button, switch the power on.
(p.20)
16. The Main menu of ScreenManager
does not operate.
ꢀCheck that the Fine Contrast mode is not activated.
(p. 17)
ꢀCheck that the Main menu of ScreenManager is
17. The Fine Contrast mode does not
operate.
not activated. (p.19)
ꢀThe adjustment lock is probably on. To unlock:
switch the LCD monitor off. Then, while pressing
the Auto adjustment button, switch the power on.
(p.20)
18. The Auto adjustment button does not
operate.
ꢀUse the graphics board’s utility software to change
19. Frequency does not change after
installing “Monitor information file”
in the attached utility disk on
Windows 95/98/2000/XP.
the input signal frequency.
38 7. TROUBLESHOOTING
English
Problems
Points to check with possible solutions
ꢀCheck that the USB cable is correctly connected.
20. USB function cannot be setup.
ꢀCheck that the PC and OS are USB compliant. (For
verification of USB support, consult the
manufacturer of each system.)
ꢀCheck the PC’s BIOS setting for USB. (For details,
refer to the manual of the PC.)
ꢀCheck that the USB cable is correctly connected.
21. PC is hung up. / The peripherals
connected to the downstream ports
do not operate.
ꢀCheck the downstream ports by connecting the
peripherals to other downstream ports. If the
problem is solved by doing this, contact an EIZO
dealer. (For details, refer to the manual of the PC.)
ꢀTry executing the following method.
• Restarting the PC - Restarting the PC
• Connecting the PC and peripherals directly
If the problem is solved by doing this, contact an
EIZO dealer.
ꢀThe power button of the APPLE keyboard does not
operate if it is connected to the EIZO USB Hub.
Please connect the keyboard directly with the PC.
Refer to the instruction of the PC for details.
7. TROUBLESHOOTING 39
English
8. CLEANING
Periodic cleaning is recommended to keep the monitor looking new and to prolong its
operation lifetime.
NOTE
• Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol),
abrasive cleaners, or other strong solvents, as these may cause damage to the
cabinet or LCD panel.
Cabinet
To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild
detergent. Do not spray wax or cleaner directly into the cabinet. (For details, refer to
the manual of the PC.)
LCD Panel
• The LCD surface can be cleaned with a soft cloth, such as cotton or lens paper.
• If necessary, stubborn stains can be removed by moistening part of a cloth with water
to enhance its cleaning power.
40 8. CLEANING
English
9. SPECIFICATIONS
LCD Panel
46 cm (18.1 inch), TFT color LCD panel with Anti-Glare
Hard Coating, Viewing Angle: Horizontal: 170°, Vertical: 170°
Image Formation Time: approx. 78 ms
0.2805 mm
Dot Pitch
Horizontal Scan Frequency
Vertical Scan Frequency
27 ∼ 82 kHz (Automatic) (Digital): 27 ~ 64 kHz
50 Hz ∼ 85 Hz (Automatic) (1280 x 1024: 50 Hz ∼ 75 Hz)
(Digital): 60Hz, (VGA TEXT : 70Hz)
Resolution
1280 dots x 1024 lines
135 MHz (Digital: 108 MHz)
16 million colors (max)
Dot Clock (Max.)
Display Colors
Display Area
359 mm (H) x 287 mm (V) (14.1” (H) x 11.3” (V))
(Viewable image size: 459 mm (18.1”))
Power Supply
100-120/200-240 VAC 10%, 50/60 Hz, 0.8 /0.4 A
Min.: 56 W
Power Consumption
Max.: 76W (With speaker and USB hub)
Power Saving Mode: Less than 5 W (When the optional
speaker and the USB hub are not connected.)
Input Connector
DVI-I x 2
Analog Input Signal (Sync)
a) Separate, TTL, Positive/Negative
b) Composite, TTL, Positive/Negative
c) Sync on Green, 0.3 Vp-p, Negative
0.7Vp-p/75Ω Positive
Analog Input Signal (Video)
Input Signal (Digital)
Signal registration
Plug & Play
TMDS (Single Link))
28 (Factory preset: 25)
VESA DDC 2B
Dimensions
399 mm (W) x 404∼ 504 mm (H) x 203 mm (D) (15.7”(W) x
15.9” ∼ 19.8” (H) x 8.0”(D))
Dimensions (without stand)
399mm (W) x 328mm (H) x 65mm (D) (15.7”(W) x 12.9”(H)
x 2.6”(D))
Weight
8.0kg (17.6 lbs.)
5.5kg (12.1 lbs.)
Weight (without stand)
Temperature
Operating: 0°C ∼ 35°C (32°F ∼ 95°F)
Storage: -20°C ∼ 60°C (-4°F ∼ 140°F)
Humidity 30% to 80% R.H. Non-condensing
USB standard
Rev. 1.1 complied self-powered hub
12 Mbps (full), 1.5 Mbps (low)
500 mA for each (Max.)
Communication speed
Downstream power supply
USB ports
Upstream port x 1, Downstream port x 4
Certifications and Standards
100-120 VAC
NRTL/C-TÜV, FCC-B, TCO’99*1, EPA ENERGY STAR
Program, TÜV/Rheinland Ergonomics Approved
CE, CB, TÜV Rheinland/GS, TCO’99*1, EPA ENERGY STAR
Program, TÜV/Rheinland Ergonomics Approved
200-240 VAC
*1 Applicable to gray (standard) color version only.
9. SPECIFICATIONS 41
English
Default settings
Analog input
100%
Digital input
100%
Contrast
Brightness
100%
100%
Smoothing
3
Fine Contrast Mode
PowerManager
Screen Size
Input Priority
Menu Off Timer
Menu Settings
Custom
VESA DPMS
Full
DVI DMPM
Signal 1
Disable
Normal
45 seconds
On
Menu Size
Menu Off Timer
Beep
Language
English
Beeper settings
Short beep
ScreenManager item selected.
ScreenManager parameter adjusted to minimum or maximum
limit.
Input signal selection button pressed.
Auto Adjustment button pressed.
ScreenManager data-save executed.
Monitor not connected correctly.
PC turned off.
Long beep
4 short beeps
Monitor received unsupported signal frequency.
2 short beeps every
15 sec.
Monitor is in the advance notice mode of the Off Timer. The power
will be off within fifteen minutes.
mm (inches)
Dimensions
399 (15.7)
3.0 (0.12)
3.0 (0.12)
361 (14.2)
168 (6.6)
TILT
SWIVEL
316 (12.4)
42 9. SPECIFICATIONS
English
Pin Assignment
DVI-I Connector
3
1
9
17
2
4
12
20
6
7
8
16
24
5
13
21
C1 C2
10 11
19
14 15
22 23
C3 C4
C5
18
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
2
3
TMDS Data2-
TMDS Data2+
TMDS Data2/4 Shield
11
12
13
TMDS Data1/3 Shield
21
22
23
NC
NC
NC
TMDS Clock shield
TMDS Clock+
4
5
NC*
NC
14
+5V Power
24
C1
TMDS Clock-
Analog Red
15 Ground (return for +5V,
Hsync and Vsync)
6
7
8
9
DDC Clock (SCL)
DDC Data (SDA)
Analog Vertical Sync
TMDS Data1-
16
17
18
19
Hot Plug Detect
TMDS Data0-
TMDS Data0+
C2
C3
C4
C5
Analog Green
Analog Blue
Analog Horizontal Sync
TMDS Data0/5 Shield
Analog Ground
(analog R, G, & B return)
10
TMDS Data1+
20
Downstream
Series A
NC
(*NC: No Connection)
USB Ports
No.
Signal
Signal
Upstream
1
2
3
VCC
- Data
+ Data
Cable power
Serial data
Serial data
Series B
4
Ground
Cable Ground
9. SPECIFICATIONS 43
English
10. GLOSSARY
Afterimage
The Afterimage is particular to LCD monitors when the monitor screen is left on for
a long period without use. The “Afterimage” can be removed gradually by changing
the displayed image.
Clock
With the analog input signal display, the analog signal is converted to a digital signal
by the LCD circuitry. To convert the signal correctly, the LCD monitor needs to
produce the same number clock pulse as the dot clock of the graphics system. When
the clock pulse is not correctly set, some vertical bars of distortion are displayed on
the screen.
DVI
(Digital Visual Interface)
A digital flat panel interface. DVI can transmit digital data from the PC directly
without loss with the signal transition method “TMDS”.
There are two kinds of DVI connectors. One is DVI-D connector for digital signal
input only. The other is DVI-I connector for both digital and analog signal inputs.
DVI DMPM
(DVI Digital Monitor Power Management)
The Power management system for the digital interface. The “Monitor ON” status
(operation mode) and the “Active Off” status (power-saving mode) are indispensable
for the DVI-DMPM as the monitor’s power mode.
EIZO MPMS
(EIZO Monitor PowerManager Signaling)
EIZO MPMS, “EIZO Monitor PowerManager Signaling” also enables power saving
on the monitor side. EIZO MPMS recognizes video signals from the PC when the PC
is in a power saving mode and reduces energy consumption of the monitor.
Gain Adjustment
Adjusts each color parameter for red, green and blue. The color of the LCD monitor
is displayed through the color filter of the LCD panel. Red, green and blue are the
three primary colors. The colors on the monitor are displayed by combining these
three colors. The color tone can change by adjusting the illumination amount passed
through each color’s filter.
Gamma
Generally, the relationship that the light intensity values of a monitor change
nonlinearly to the input signal level is called “Gamma Characteristic”. On the
monitor, low gamma values display the whitish images and high gamma values
display the high contrast images.
44 10. GLOSSARY
English
Phase
The phase adjustment decides the sampling timing point for converting the analog
input signal to a digital signal. Adjusting the phase after the clock adjustment will
produce a clear screen.
Range Adjustment
The Range Adjustment controls the level of output signal range to display the whole
color gradation.
Resolution
The LCD panel consists of a fixed number of pixel elements which are illuminated to
form the screen image. The EIZO L685EX display panel consists of 1280 horizontal
pixels and 1024 vertical pixels. At a resolution of 1280 x 1024, all pixels are
displayed as a full screen.
sRGB (Standard RGB)
“International Standard for Red, Green and Blue color space”
A color space was defined with the aim of the color matching between applications
and hardware devices, such as monitors, scanners, printers and digital cameras. As a
standard default space, sRGB allows Internet users to closely match colors.
Temperature
Color temperature is a method to measure the white color tone, generally indicated in
degrees Kelvin. At high temperatures the white tone appears somewhat blue, while at
lower temperatures it appears somewhat red. Computer monitors generally give best
performance at high temperature settings.
5,000K: Often used in printing industry.
6,500K: Good for video-image display.
9,300K: Default setting for your EIZO monitor.
TMDS
(Transition Minimized Differential Signaling)
A signal transition method for the digital interface
VESA DPMS
(Video Electronics Standard Association – Display Power Management Signaling)
The acronym VESA stands for “Video Electronics Standards Association” and DPMS
stands for “Display Power Management Signaling.” DPMS is a communication
standard that PCs and graphics boards use to implement power savings on the
monitor side.
10. GLOSSARY 45
APPENDIX/ANHANG/ANNEXE
Preset Timing Chart for Analog input
Timing-Übersichten für Analog Eingang
Synchronisation des Signaux pour Analog numerique
Based on the signal diagram shown below 25 factory presets have been registered in the
monitor's microprocessor.
Der integrierte Mikroprozessor des Monitors unterstützt 25 werkseitige
Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).
25 signaux ont été enregistrés en usine dans le microprocesseur du moniteur,
conformément au diagramme de synchronisation ci-dessous.
A
B
C
D
E
F
Front Porch
Sync Period
Vordere Schwarzschulter
Synchronimpuls
Front avant
Délai de synchronisation
Front arrière
Back Porch
Hintere Schwartzschulter
Austastzeit
Blanking Period
Display period
Total cycle
Délai de clignotement
Délai d’affichage
Cycle total
Displya-Zeit
Kompletter Zyklus
Sync-Signalpegel
H
Sync signal level
Niveau du signal de
synchronisation
V
Video signal level
Video-Signalpegel
Niveau du signal vidéo
APPENDIX/ANHANG/ANNEXE
i
Dot Clock
MHz
Sync Polarity
Frequencies
H kHz V Hz
A: Front Porch
B: Sync Period
V ms/
Mode
H
V
H µs/Dot V ms/Line H µs/ Dot
Line
Nega. Nega.
Nega. Posi.
VGA
640 × 480
25.175
28.322
30.24
57.28
100.0
126.2
31.5
31.469 59.940
31.468 70.087
0.318/
8
0.064/
2
3.813/
96
0.054/
2
VGA
720 × 400
0.636/
18
0.381/
12
3.813/
108
0.064/
2
Posi.
Posi.
Posi.
Posi.
Posi.
Posi.
Posi.
Posi.
Macintosh
640 × 480
35.00
49.73
68.68
74.76
37.86
37.50
43.27
35.16
37.88
48.08
46.88
66.67
74.55
75.06
74.76
72.81
75.00
85.01
56.25
60.32
72.19
75.00
2.116/
64
0.086/
3
2.116/
64
0.086/
3
Macintosh
832 × 624
0.559/
32
0.020/
1
1.117/
64
0.060/
3
Macintosh
1152 × 870
0.320/
32
0.044/
3
1.280/
128
0.044/
3
Macintosh
1280 × 960
0.190/
24
0.013/
1
1.204
152
0.040/
3
Nega. Nega.
Nega. Nega.
Nega. Nega.
VESA
640 × 480
0.508/
16
0.026/
1
1.270/
40
0.079/
3
VESA
640 × 480
31.5
0.508/
16
0.027/
1
2.032/
67
0.080/
3
VESA
640 × 480
36.0
1.556/
56
0.023/
1
1.556/
56
0.069/
3
Posi.
Posi.
Posi.
Posi.
Posi.
Posi.
Posi.
Posi.
Posi.
Posi.
VESA
800 × 600
36.0
0.667/
24
0.028/
1
2.000/
72
0.057/
2
VESA
800 × 600
40.0
1.000/
40
0.026/
1
3.200/
128
0.106/
4
VESA
800 × 600
50.0
1.120/
56
0.770/
37
2.400/
120
0.125/
6
VESA
800 × 600
49.5
0.323/
16
0.021/
1
1.616/
80
0.064/
3
VESA
800 × 600
56.25
65.0
53.674 85.061
0.569/
32
0.019/
1
1.138/
64
0.056/
3
Nega. Nega.
Nega. Nega.
VESA
1024 × 768
48.36
56.48
60.02
68.68
67.50
60.00
63.98
79.98
60.00
70.07
75.03
85.0
0.369/
24
0.062/
3
2.092/
136
0.124/
6
VESA
1024 × 768
75.0
0.320/
24
0.053/
3
1.813/
136
0.106/
6
Posi.
Posi.
Posi.
Posi.
Posi.
Posi.
Posi.
Posi.
VESA
1024 × 768
78.75
94.5
0.203/
16
0.017/
1
1.219/
96
0.050/
3
VESA
1024 × 768
0.508/
48
0.015/
1
1.016/
96
0.044/
3
VESA
1152 x 864
75.0
75.00
60.00
60.02
75.03
0.593/
64
0.015/
1
1.185/
128
0.044/
3
VESA
1280 x 960
60.0
0.889/
96
0.017/
1
1.037/
112
0.050/
3
Nega. Nega.
Posi. Posi.
VESA
1280 × 1024
108.0
135.0
0.444/
48
0.016/
1
1.037/
112
0.047/
3
VESA
1280 × 1024
0.119/
16
0.013/
1
1.067/
144
0.038/
3
ii
APPENDIX/ANHANG/ANNEXE
C: Back Porch
D: Blanking Period
E: Display Period
F:Total Cycle
H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line
1.589/
40
0.794/
25
5.720/
144
0.922/
29
25.442/
640
15.253/
480
31.778/
800
16.683/
525
1.907/
54
1.111/
35
6.356/
180
1.556/
49
25.422/
720
12.711/
400
31.778/
900
14.267/
449
3.175/
96
1.114/
39
7.407/
224
1.286/
45
21.164/
640
13.714/
480
28.571/
864
15.000/
525
3.911/
224
0.784/
39
5.587/
320
0.865/
43
14.525/
832
12.550/
624
20.112/
1152
13.415/
667
1.440/
144
0.568/
39
3.040/
304
0.655/
45
11.520/
1152
12.667/
870
14.560/
1456
13.322/
915
1.838/
232
0.482/
36
3.233/
408
0.535/
40
10.143/
1280
12.841/
960
13.376/
1280
13.376/
1688
3.810/
120
0.528/
20
5.587/
176
0.634/
24
20.317/
640
12.678/
480
26.413/
832
13.735/
520
3.810/
120
0.427/
16
6.349/
200
0.533/
20
20.317/
640
12.800/
481
26.667/
840
13.333/
500
2.222/
80
0.578/
25
5.333/
192
0.670/
29
17.778/
640
11.093/
480
23.111/
832
11.764/
509
3.556/
128
0.626/
22
6.222/
224
0.711/
25
22.222/
800
17.067/
600
28.444/
1024
17.778/
625
2.200/
88
0.607/
23
6.400/
256
0.739/
28
20.000/
800
15.840/
600
26.400/
1056
16.579/
628
1.280/
64
0.478/
23
4.800/
240
1.373/
66
16.000/
800
12.480/
600
20.800/
1040
13.853/
666
3.232/
160
0.448/
21
5.172/
256
0.533/
25
16.162/
800
12.800/
600
21.333/
1056
13.333/
625
2.702/
152
0.503/
27
4.409/
248
0.578/
31
14.222/
800
11.179/
600
18.631/
1048
11.756/
631
2.462/
160
0.600/
29
4.923/
320
0.786/
38
15.754/
1024
15.880/
768
20.677/
1344
16.666/
806
19.20/
144
0.513/
29
4.053/
304
0.673/
38
13.653/
1024
13.599/
768
17.707/
1328
14.272/
806
2.235/
176
0.466/
28
3.657/
288
0.533/
32
13.003/
1024
12.795/
768
16.660/
1312
13.328/
800
2.201/
208
0.524/
36
3.725/
352
0.582/
40
10.836/
1024
11.183/
768
14.561/
1376
11.765/
808
2.370/
256
0.474/
32
4.148/
448
0.533/
36
10.667/
1152
12.800/
864
14.815/
1600
13.333/
900
2.889/
312
0.600/
36
4.815/
520
0.667/
40
11.852/
1280
16.000/
960
16.667/
1800
16.667/
1000
2.296/
248
0.594/
38
3.778
408
0.656/
42
11.852/
1280
16.005/
1024
15.630/
1688
16.661/
1066
1.837/
248
0.475/
38
3.022/
408
0.525/
42
9.481/
1280
12.804/
1024
12.504/
1688
13.329/
1066
APPENDIX/ANHANG/ANNEXE iii
Dot Clock
MHz
Sync Polarity
Frequencies
A: Front Porch
B: Sync Period
Mode
H
V
H kHz
V Hz
H µs/Dot V ms/Line H µs/ Dot V ms/ Line
Composite,
Nega.
Workstation
1152 × 900
94.2
107.50
117.0
61.974
71.858
71.691
66.141
0.425/
40
0.032/
2
1.359/
128
0.065/
4
Composite,
Nega.
Workstation
1152 × 900
76.202
67.189
0.223/
24
0.028/
2
1.265/
136
0.111/
8
Composite,
Nega.
Workstation
1280 × 1024
0.205/
24
0.028/
2
0.957/
112
0.112/
8
iv APPENDIX/ANHANG/ANNEXE
C: Back Porch
D: Blanking Period
E: Display Period
F:Total Cycle
H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line
2.123/
200
0.500/
31
3.907/
368
0.597/
37
12.229/
1152
14.522/
900
16.136/
1520
15.119/
937
1.712/
184
0.459/
33
3.200/
344
0.598/
43
10.716/
1152
12.525/
900
13.916/
1496
13.123/
943
1.846/
216
0.460/
33
3.009/
352
0.600/
43
10.940/
1280
14.283/
1024
13.949/
1632
14.883/
1067
APPENDIX/ANHANG/ANNEXE
v
[Applicable to gray (standard color version only).]
Congratulations!
You have just purchased a TCO’99 approved and labelled product!
Your choice has provided you with a product developed for
professional use. Your purchase has also contributed to reducing
the burden on the environment and also to the further development
of environmentally adapted electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging
the adaptation of goods and services to the environment. The main problem, as far as computers
and other electronics equipment are concerned, is that environmentally harmful substances are
used both in the products and during their manufacture. Since it is not so far possible to
satisfactorily recycle the majority of electronics equipment, most of these potentially damaging
substances sooner or later enter nature.
There are also other characteristics of a computer, such as energy consumption levels, that are
important from the viewpoints of both the work (internal) and natural (external) environments.
Since all methods of electricity generation have a negative effect on the environment (e.g. acidic
and climate-influencing emissions, radioactive waste), it is vital to save energy. Electronics
equipment in offices is often left running continuously and thereby consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO’99 scheme which provides for international
and environmental labelling of personal computers. The labelling scheme was developed as a
joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska
Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens
Energimyndighet (The Swedish National Energy Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission
of electric and magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals,
brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among
other things. The product must be prepared for recycling and the manufacturer is obliged to have
an environmental policy which must be adhered to in each country where the company
implements its operational policy.
The energy requirements include a demand that the computer and/or display, after a certain
period of inactivity, shall reduce its power consumption to a lower level in one or more stages.
The length of time to reactivate the computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for example, in respect of the
reduction of electric and magnetic fields, physical and visual ergonomics and good usability.
You will find a brief summary of the environmental requirements met by this product on the
right. The complete environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): [email protected]
Current information regarding TCO’99 approved and labelled products may also be obtained
Environmental Requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings.
Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in
a computer casing can consist of flame retardant substances. Most flame retardants contain
bromine or chloride, and those flame retardants are chemically related to another group of
environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the
PCBs are suspected of giving rise to severe health effects, including reproductive damage in
fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have
been found in human blood and researchers fear that disturbances in foetus development may
occur.
The relevant TCO’99 demand requires that plastic components weighing more than 25 grams
must not contain flame retardants with organically bound bromine or chlorine. Flame
retardants are allowed in the printed circuit boards since no substitutes are available.
Cadmium**
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain
computer displays. Cadmium damages the nervous system and is toxic in high doses.
The relevant TCO’99 requirement states that batteries, the colour-generating layers of display
screens and the electrical or electronics components must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system
and is toxic in high doses.
The relevant TCO’99 requirement states that batteries may not contain any mercury. It also
demands that mercury is not present in any of the electrical or electronics components
associated with the labelled unit.
CFCs (freons)
The relevant TCO’99 requirement states that neither CFCs nor HCFCs may be used during
the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing
printed circuit boards. CFCs break down ozone and thereby damage the ozone layer in the
stratosphere, causing increased reception on earth of ultraviolet light with e.g. increased risks
of skin cancer (malignant melanoma) as a consequence.
Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the
nervous system and in higher doses, causes lead poisoning.
The relevant TCO’99 requirement permits the inclusion of lead since no replacement has yet
been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are haevy metals which are Bio-accumulative.
For U.S.A, Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party
EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone: (562) 431-5011
declare that the product
Trade name: EIZO
Model: FlexScan L685
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
* Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep
interference within the limits of a Class B digital device.
- AC Cord
- Shielded Signal Cable (enclosed)
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
Hinweis zur Ergonomie :
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB 2000 mit dem
Videosignal, 1280 Punkte × 1024 Zeilen, RGB analog, 0,7 Vp-p und mindestens 75,0 Hz
Bildwiederholfrequenz, non interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen,
die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte Erkennbarkeit,
Augenbelastung bei zu geringem Zeichenkontrast.)
Recycle Auskunft
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland
zusammen mit dem Partner von Roll MBB Recycling GmbH. Dort werden die Geräte in ihre
Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen Abholtermin
zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte folgende Rufnummer:
02153-73 35 00. Weitere Informationen finden Sie auch unter der Internet-Adresse:
www.eizo.de.
|