ACCESSORY PANEL KITS
ZPSS360 – Stainless Steel
ZPBS360 – Black Acrylic
Installation
Instructions
Kit Contents
• 2 Filler panels
(with ZPSS360 only)
• Door panel
Tools Required
BEFORE YOU BEGIN
• Phillips screwdriver
• Safety glasses
• Gloves to protect against
sharp edges
Read these instructions completely and carefully.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Grille panel
• Note to Consumer – Keep these instructions with
• Wood block
• Hammer
your Owner’s Manual for future reference.
REMOVE HANDLES AND TRIM
INSTALL PANELS
STEP 2
STEP 1
• Open the door to 90°. Remove the 6 Phillips head
screws from the door handle.
• Remove protective film from appearance panel.
• Slide panel into the door trim.
• If installing stainless steel panels, first slide filler
panel into the door trim, then slide stainless panel
into the trim.
• If necessary, tap with a wood block until panel slips
under the hinge side trim.
• Remove handle. Retain all screws.
• Remove 6 screws holding trim. Lift off trim.
Retain screws.
Use Front Holes
to Secure Trim
Use Rear Holes
to Secure Handle
• There are two sets of holes in the handle side trim.
Replace side trim by installing the original screws
in the FRONT screw holes.
• Secure the handle to the door using the REAR
screw holes.
|
Echo Chipper PAS 230 User Manual
Echo Pole Saw 89865022060 User Manual
Edelbrock Automobile Parts 1967 User Manual
Edelbrock Automobile Parts R09399 User Manual
Euro Pro Convection Oven JO287SP User Manual
Fagor America Cooktop 2MFA2GLSX User Manual
Ford Automobile 2010 Fusion Hybrid User Manual
Franke Consumer Products Cooktop FGC 904 User Manual
Global Machinery Company Portable Generator GEN800 User Manual
Goodman Mfg Air Conditioner 103 EER User Manual